Knowledge / Skills required: Highly Computer Literate COTO application & the GCC and FIDIC forms of Contract Understanding of Construction Industry Disciplinary Procedures SANRAL & Service Provider Contracts Technically competent with an understanding of the built environment. Project Management Concepts Pavement Evaluation and Design Pavement Materials Investigations Education and Qualifications (essential): Road Asset Management Bachelor’s degree in civil engineering ECSA Professional Registration as Pr. Eng 10 – 15 years of related experiences (Pavement specific knowledge and experience) Traffic loading analysis HDM-4 Economic Analysis Management and mentorship of design teams Road Construction (Contracts Engineering) Tender Documentation and Evaluations Proposals and tendering for consultant services.

Roads Resident Engineer to commence duties as soon as possible. Must have a B.Sc Eng / B.Eng / B.Tech Eng qualification in civil engineering. Must be Pr.Eng / Pr.Tech Eng registered. Minimum 20yrs relevant roads and earthworks experience on major road projects (Highways and national roads). SANRAL will consider 15yrs

Junior Electrical Engineer(design )Must be registered as a Candidate on ECSA1-3 years experienceExperience in built environmentPlease inbox me or send Cv to bridget@takora.co.za

Minimum qualification, skills, and experience: BSc / BTech in Civil Engineering 3 years Professional Registered with SACPCMP 10 years’ experience in Construction Management Strong supervision and management skills Excellent in site/project administration, sub-contractors’ relation and management. Proficient in MS projects, MS Office Good client relations. Tracking of master program and reporting on the program. Excellent planning skills – procurement, subcontractors, etc Good labour relations and management Handle routine contract administration including enforcing site Health and Safety requirements. Must have a driving licence and driving experience, own vehicle will be an added advantage. Behavioural competencies: Excellent communication and report writing skills Analytical thinker and innovative. Self-starter who solves problems with little to no guidance. Strong business and financial acumen. Strong Project Management Skills Able to work under pressure. Attention to detail. Excellent interpersonal, communication and networking skills  

Job Description Ibhongo Consulting Engineers is recruiting a Professional Civil Engineer or Technologist for their office in Durban.· Planning, design and contract administration of civil engineering projects from inception to completion.· Preparation of tender documents.· Preparation of reports (Project Inception, Concept and Viability, Design, tender evaluation, progress, financial, close-out, etc).· Day-to-day contract administration and management of civil engineering projects.· Handling of technical queries and resolutions and leading Site and Technical Meetings on site, including the taking of minutes.· Financial control of construction contracts· Communicate frequently with all professionals and clients.· Handling of technical queries and dispute resolutions in conjunction with others.· Assist with project safety and environmental matters during construction.· General office and project related admin.Requirements • At least a bachelor’s degree in civil engineering.• Registration with ECSA as a Professional Engineer or Professional Engineering Technologist.• At least 5 years’ verifiable post graduate experience in the planning, design and contract administration of civil engineering and building projects from inception to completion.• Proficient in the use of Microsoft Office Suite and Microsoft Office Project.• Basic knowledge and experience with AutoCAD Civil3D.• Experience in the use of Building Information Modeling (BIM) software, in particular ACC will be advantageous.• Own Vehicle• Valid Driver’s License

Requirements: BSc or BEng or BTech in Civil Engineering Pr Eng or Pr Tech Registration with ECSA Pr CMP Registration with SACPCMP will be an advantage Minimum 10 years’ relevant experience in construction and/or projects site supervision Experience as Engineer’s Representative on SANRAL project/s is required Thorough working knowledge of specifications and Bill of Quantities (COLTO / COTO, SANS 1200, project specific etc.) Thorough working knowledge of Conditions of Contract (FIDIC 1999, NEC 3/4, GCC 2010/2015 and JBCC) will be beneficial Proficient Microsoft Office skills required Excellent Communication and Interpersonal skills Excellent client relation skills

Duration of Contract: Estimated 15-18 monthsSite is around the PMB, KZN area for construction of Freeway lighting which also entails the required Civil & Structural Works.Monthly Pay: 55K-65K all costs inclusive (R1500 for Cellular and data allowance inclusive in monthly pay) For the following services but not limited to:? Client liaison link between the Company and the Client/ End User (SANRAL)/Consultant? Undertaking design work including reviewing the designs, bills and contract documentation? Attending meetings with Client on behalf of the Company as required? Attending meetings with End User (SANRAL)/Consultant on behalf of the Company as required? Regular inspections of site in terms of Contractual Compliance (Site Camp, Plant, H&S Audits, project scope)? Monitoring scope of works being carried out on site in terms of project scope requirements.? Updating of project programme on a regular basis as per Company and the Client/End User (SANRAL)/ Consultant requirements? Managing project programme timelines? Project Co-ordination? Preparing of cashflows and updating of cashflow on a regular basis? Preparing of progress reports and updating of progress reports? Presenting of progress reports and cashflows to Client/ End User (SANRAL)/Consultant on a regular basis? Compiling and preparing of payment certificates which includes determining quantities of work done as per the BOQ’s for invoicing to the Client/ End User (SANRAL)/Consultant in liaison with Contracts Manager? Understanding of the NEC, GCC, FIDIC and other Contracts? Attending of site meetings, design/technical meetings and any other meetings as required? Engaging with the Contracts Manager and Site Supervisor on a regular basis to ensure smooth running of the project.? Undertaking & managing of Contractual Matters, Claims and Contractual administration ? Undertaking & chairing internal construction progress meetings with the team on a regular basis to ensure project timelines are met, addressing risk matters and any project catchup plans if project is behind schedule Minimum Requirements Criteria of Resource Qualifications, Professional Registration and Experience? Min. B-Tech – Electrical Engineering? Min. ECSA Pr. Tech. Eng? Min. 8 years relevant experience in Freeway & Street Lighting Projects Personal Competencies? Proactive? Ability to effectively communicate on all levels? Excellent in taking initiative? People’s Person Technical Skills? Microsoft Office Suite? Internet? Report Writing? MS Project ? Draughting skills with AutoCAD and Microstation? Presentation Skills

DUTIES AND RESPONSIBILITIES The successful candidate will be responsible for the successful execution of projects and duties will include: Manage projects in line with international best practice Plan projects in terms of Project scope Project schedule Project costs Manage the execution of projects Manage project execution within agreed scope, cost and schedule constraints Implement project quality system Manage project resources Lead and coordinate professional teams Lead and supervise construction contracts Manage project communication, including client, user and stakeholders Manage project risks Manage project procurement Conduct technical and contract meetings Assist in preparation of fee proposals and bids Administering building contracts (JBCC, etc.) EXPERIENCE REQUIRED The successful candidate will have more than 5 years’ project management experience in the consulting in the built environment, with a good understanding of the full project lifecycle and project management principles.   QUALIFICATION BSc. Construction Studies/BSc. Construction Management/BSc. Quantity Surveying/or equivalent PMP/SACPCMP registered.   SKILLS A working knowledge of typical construction contracts (JBCC, FIDIC, NEC, GCC) MS Office literacy MS Project literacy PM Bok literacy Thorough understanding of the project life cycle Good understanding of building construction projects Good communication skills Ability to manage multiple projects Ability to lead a team Able to conduct themselves in a professional manner when dealing with clients and other stakeholders

Key Requirements. Pr Eng./Pr Tech or Pr.CMP B.Sc./BEng /Btech degree in civil Engineering  10 years of experience in management of Civil/Infrastructure  Experience in managing GCC & JBCC Contracts and dealing with claims will be an advantage Experience in Civil 3D and AutoCAD Will be and advantage 

Requirements: - Must be registered with ECSA as a Technician, Technologist or Engineer.  PrTechniEng, PrTechEng or PrEng (these are the professional qualifications) - Must have consulting electrical engineering work, typically private and government sector work - Must be based Durban based however projects are all over, this is the nature of engineering work. kindly send CVS to bridget@takora.co.za  

Must have Bachelor of Engineering degree/Bachelor of Science in Electrical Engineering Must be registered with ECSA as a Professional Engineer Minimum 8 years of professional experience in electronic building services projects Proficiency in AutoCAD, ETAP, Retic Master and Revit Knowledge of the commercial aspects of project management

Position: Junior Process Engineer Location: Centurion   Requirements: - Must have BSc, BEng, BTech (Chemical) - Must have 0 to 2 Years minimum experience. - Must have operation/plant experience - Must be eligibility to apply for Registration as a Professional Engineering in South Africa (ECSA). - Must have demonstrated ability to work in a team environment. - Must have demonstrated commitment to quality and continuous learning. - Must have strong computer skills, proficient with MS Office software. - Must have experience in gold and other base metals metallurgy - Must have experience in using METSIM, SysCAD, JKSimMet, HSc, and other process simulation software is considered an asset. - Must be proficient in multiple languages is considered an asset.   Kindly send CVS to bridget@takora.co.za  

We have an exciting Electrical Position for you!!!Position: Senior Electrical Engineer Location: PretoriaMinimum Requirements:Must have BTech/ BEng Electrical Eng.Must be registered with ECSA as a PrTech/PrEng.Must have Previous consulting Building services(MV/LV) experience.Must have Minimum 5 to 10 years experience.Must be willing to work under pressure.Must be Proficient in MS packages and MS Projects.Email: bridget@takora.co.za

Mpumalanga (Mbombela) Minimum Qualifications BSC/ BTech (Civil Engineer/Technologist). Registration as a Professional Engineer/Technologist with ECSA. Experience At least five (5) years’ experience in roads and stormwater design. Duties and Responsibilities Conduct feasibility studies and prepare reports. Conduct condition assessment and prepare reports and presentations. Liaise, co-operate and provide necessary information to the client, principal consultant and the other consultants. Advise on Economic factors affecting the project. Design Development of roads and stormwater infrastructure. Provide necessary information within the agreed scope of the project to the other consultants and advise on services required. Conduct site visits for evaluation and approval of work done by the contractors. Assist the Quantity Surveyors in preparation and issuing of interim payment certificates. Performing cost management of construction projects. Assisting with claims and dispute resolutions. Project Management. Salary: Market related Email address: bridget@takora.co.za

BSc or BEng in Civil Engineering with a minimum of 10 - 15 years’ experience in pavement design for Roads and Highways projects Candidate must be registered with ECSA as a Professional Engineer (Pr. Eng). Masters degree in Pavement Engineering and active participation in relevant industry committees e.g. SAT, SAICE and participation at conferences will be advantageous. Highly competent in road pavement analysis and rehabilitation design for National, Provincial, and Municipal Road projects. Demonstrate experience in the design of flexible and rigid pavements, unsealed roads, mining heavy haul roads, review and approval of asphalt mix and seal designs including an understanding of road construction materials. Good understanding of relevant pavement design methods and applicable industry guidelines is essential (i.e., AASHTO, Pavement Number, Mechanistic Design, COTO, COLTO, SAPEM, TRH, TMH and TG series). Experience must include involvement in the design of new pavements, pavement rehabilitation, upgrading and maintenance of road pavement projects including site experience where applicable. Must have been involved in all stages of a road project i.e., Basic Planning Studies & Reporting, Conceptual, Preliminary, Detailed Design, Preparation of Design Reports, Tender Documentation and Construction Monitoring. Good technical report writing skills are essential including the ability to effectively communicate and liaise with clients and lead design teams. Proficiency in Rubicon, cncPave and other pavement design software is essential.

Minimum of 10 to 15 years of experience in the wind industry with energy storage hybridization and network studies as a benefit.Wind resource assessment, feasibility studies, site layout and optimization, project design and/or execution on site for on- and off-shore wind projects. Degree in Electrical or Mechanical Engineering, Post Graduate Degree will be beneficial. Professional registration with ECSA or equivalent international association Programming and data analysis skills such as Python, MATLab, etc. would be considered a strong asset Ability to quantitative analysis and mastery of computer software specific to industry (WASP, CFD, Windfarmer, Windpro, RETScreen, PVSyst, HOMER, etc.) as well as power system simulation software (PowerFactory, PSSE, PSCAD, etc.) Assessment of wind resources and wind projects including strong understanding of met mast data analysis, wind regime/wind flow modelling, wake effects, energy yield forecasting, and uncertainty analysis. Writing and reporting skills: Excellent communication, scientific rigour Autonomy and initiative Fluently in English; additional language skills and proficiency are considered a positive attribute

We are looking to hire a mechanical or structural engineer into the Specialized Engineering (SE) group who has 0-5 years of experience, therefore ranging from a graduate to mid-senior level. The focus of SE is to provide specialized engineering expertise and services. These would include, but are not limited to, advanced numerical analysis (for example, FEA), Fitness-for-Service Assessments, field measurements and inspections and technology development. Our work is highly diverse, including opportunities to work on unique and challenging projects across all the industries that we serve. This job requires close interaction with personnel within the SE group, from other engineering disciplines and our clients organizations. We are looking for a candidate with the following attributes: Excellent academic performance and a demonstrated interest in structural and/or thermomechanical engineering of industrial equipment;Strong fundamentals in theory and application of solid mechanics / dynamics / FEA;0-5 years of experience in the application of numerical methods to practical engineering problemsPreferably has completed their masters in engineeringHas taken courses and / or done numerical simulations at a post -graduate level, or in another role, and demonstrates a passion and aptitude for numerical analysis;Ability to work both independently and as part of a team on challenging projects, as this job requires heavy interaction with engineers within the SE group and from other disciplines, to perform detailed engineering analysis.Organizational ability to manage multiple projects / priorities in a fast-paced environment;Eagerness to learn new engineering concepts and apply them to novel projects and technology;Fast learner with an eagerness to develop engineering fundamentals and apply them to solving challenging real-world problems and projects;Excellent verbal and written communication skills;Excellent interpersonal and teamwork skills;Strong safety and quality focus

BSc or BEng in Civil Engineering with a minimum of 10 - 15 years’ experience in the planning and design of Roads and Highways and must be registered with ECSA as a PrEng. Highly competent in road conceptual planning and geometric design and drawing production standards for national, provincial, and municipal road projects. Demonstrate experience in the design of freeway interchanges, major provincial roads, urban arterial roads, dual carriageways, major intersections, roundabouts, traffic engineering, and drainage. Good understanding of relevant design methods and guidelines for Roads & Highways projects at National, Provincial and Municipal level is essential. Must have been involved on all stages of a road project i.e., Basic Planning Studies & Reporting, Conceptual, Preliminary, Detailed Design, Preparation of Design Reports, Tender Documentation and Construction Monitoring. Experience must include involvement in greenfield, improvement, upgrading, and maintenance road projects. Good technical report writing skills are essential including ability to effectively communicate and liaise with clients and lead design teams. Good interpersonal and professional communication skills with high levels of confidence, patience, and commitment. Proficient in Civil 3D and AutoCAD software.

Registered professional engineer with a Bachelors and/or post-graduate degree in process or mechanical engineering Minimum 15 years' professional engineering experience in the Oil & Gas sector, ideally with well-established connections within Sasol, our key Client in South Africa Demonstrated track record in leading and growing teams of engineers in professional services in the Oil & Gas sector Have well established connections within the Oil & Gas industry in Southern Africa Be recognized as a Subject Matter Expert (SME) in at least one aspect of the Oil & Gas sector Multi-discipline technical and managerial know-how, allowing for easy interface with technical functions Experience in energy transition scopes including hydrogen and decarbonization would be an advantage Understand the project lifecycle process and the interdisciplinary dependencies during project execution

Bachelor’s degree in Civil Engineering or Geotechnical Engineering from an accredited universityPost-graduate degree in Geotechnical Engineering is considered an assetRegistered as a Professional Engineer10+ years’ experience in relevant geotechnical fieldExperience in seismic design is considered an assetExperience with working on projects in a multi-disciplinary environmentSound understanding of design engineering codes and technical standardsStrong written skills to prepare reports, proposals and other project deliverablesGood communication and interpersonal skillsGood planning and organizational skillsAbility to function without supervisionGood safety awareness

• Bachelor's degree in Quantity Surveying or related field, or equivalent experience • Expertise in Cost Control, Cost Management, and Cost Planning • Must have 10-15 years experience • Must have in-depth understanding of GCC, FIDIC,NEC • Professional Quantity Surveyor (PrQS) certification or equivalent is beneficial

A BSc (Hons) in Environmental Management/Sciences or a relevant field is a requirement.An MSc in Environmental Management/Sciences or a relevant field will be a strong advantage.EAPASA registration is a must, and Pr.Sci.Nat registration is preferred. Must have a minimum of 15 years of post-graduate consulting experience on a similar role.Must have conducted Basic Assessments and EIAs in South Africa

Must have a minimum of a B Sc. or B Eng. Degree in Civil Engineering.A post-graduate qualification in Pavement Studies would be an advantage.Must be a Professionally Registered Engineer (Pr Eng.) Must have a minimum of 8 years relevant years’ post-professional registration experience in a consulting engineering environment including design, and contract documentation,Must be competent in Elmod and Rubicon. Must have a valid driver’s license.

BSc Eng (Civil) or BSc Hydrology (Hons), preferably Master’s levelA proven track record of water resource planning and modelling in small and large systemsProfessional registration (Pr.Sci.Nat or Pr.Eng) Must have solid experience in mining sector, storm water management planning and water balances Extensive knowledge and experience using typical modelling systems used in South Africa (ACRU, Pitman, PC SWMM, WRYM, WRPM, HECRAS, GoldSim, WEAP, SWAT, Mike modelling and DSS tools) and the use of GIS are required. Must have strong inter-personal and networking, business development and project management skills

A minimum of a B Sc. or B Eng. degree in Civil Engineering.Professional Engineer (Pr Eng) registration is required.A Master’s degree in Pavement Engineering will be an added advantage.Minimum of 10 years’ experience in a similar role Strong technical skills in AutoCAD, Civil3D, Rubicon, and HDM4 Senior project management experience. A valid driver’s license is essential.

Must have a minimum of a BSc or B Tech in Civil Engineering.Must be a professionally registered with CESA as Pr Eng or Pr Tech Eng.Pr CPM would be advantageous. Working knowledge of GCC & FIDIC Yellow book is requiredWorking knowledge of GCC & FIDIC Yellow book is required It will be highly advantageous to have experience with wastewater treatment and water retention structures Must have a minimum of 10-15 years’ relevant civil & civil structural experience A valid driver's license is essential.Must have a valid passport.

Must have a minimum of a BSc or B Tech in Civil Engineering. Must be a professionally registered with CESA as Pr Eng or Pr Tech Eng. Must have a minimum of 8 years’ relevant RE experience in earthworks, dams and concrete works.

• More than 5 years experience in consulting engineering industry. • Pr. Eng or Pr.TechEng professional registration preferred.• Building electrical (SANS10142) design experience.• Specific solar experience, have designed and managed projects >100kWp. ECSA Stage 1 to 4.• Project and contract management experience (JBCC and or FIDIC). ECSA Stage 5 and 6.

Must have B.Eng / B.Sc. / B.Tech in Electrical Engineering.Must be professional Registration with ECSA (Pr.Eng / [URL Removed]Must have minimum of five years experience in design and construction management of Eskom and municipal distribution 11-132 kV substations (specifically Primary Plant) and being well versed with Eskom, NRS and IEEE standards.Must have a good understanding of Eskom and Municipal reticulation networks (MV and LV) and Electrification, working within a multi-discipline project environment and knowledge of renewable energy solutions and Grid Code Compliance would be beneficial.Must be proficient in English with exceptional communication and report-writing skills.Must have the ability to work under pressure and independently on complex tasks

Requirements: A BSc Eng, BEng or BTech (preferably BS Eng or BEng) in electrical engineering with atleast 10 to 15 years post qualification experience Registration as Pr. Eng or Pr. Tech with the Engineering Council of South Africa (ECSA) Good verbal and written communication skills Applicants shall have the following experience: Design and project management, including the use of applicable software, inprocess environments; electrification and/or building services. Use of applicable built environment forms of contract, e.g., FIDIC, NEC, GCCand/or JBCC. For the above position, candidates must be/have: Project management experience Staff management experience Self-motivated, confident, able to work independently and in a team. Good written and verbal communication skills Good interpersonal skills Good negotiation skills Good people management skills Valid driver's license (at least code EB) Kindly send cvs to bridget@takora.co.za  

Must Have a Degree Must Be Registered With ECSA as a Pr Eng. Must have 8+ years of relevant post registration experience. Must have worked with SANRAL/RAL Projects. Must have Knowlegde with Revit and AutoCad.

Minimum Requirements(Non-negotiable): Must have experience in AutoCad 3D / Revit Must be SA Citizen Must be willing to relocate to Secunda (travelling up and down is not an option) Minimum 5 years experienc Structural Engineer “highlights”: Design experience – Heavy industry EE would be an advantage but not a requirement Able to work under pressure

Key Competencies: Interpreting plans and specifications to ascertain measuring requirements Adjust surveying instruments in order to maintain accuracy Plan and conduct ground survey designed to establish baselines, elevations and other geodetic measurements Establish fixed points for use in making maps, using geodetic and engineering instruments Determine longitudes and latitudes of important features and boundaries in survey areas Train assistants and helpers, and direct their work in such activities as performing surveys or drafting maps Must be able to do his own accurate calculations as per drawing Verify the accuracy of survey data conducted at survey sites Coordinate work with engineering and architectural personnel Calculate heights, depths, relative positions, property lines of terrain if required Computer Skills required: Model Maker, Trimble, Real Works, EasySurv, AgiSoft, Photoscan, Global Mapper, Planet GIS, Microsoft Office Suite, Microsoft Projects is an added advantage. Qualifications and Experience: BSc Geomatics/BSc Land Surveying/BTech Surveying professional registration National Diploma survey technician/technologist NQF Level 06 Diploma

Structural EngineerMinimum Requirements• Minimum of 10 years of relevant experience in the Structural Engineering environment, within the built environment, preferably within a consulting engineering business• A strong background in lateral design of structural using software such as Tekla, Etabs, or Robot.• Deliverables such as drawings, reports, schedules and calculations on time• Relevant tertiary qualifications in civil engineering, B.Eng. (Civil),• Previous exposure to datacentres, stadiums, education facilities, healthcare buildings, commercial buildings, warehouses, and other commercial projects.• International project experience (outside South Africa) (beneficial)• A willingness to learn and investigate technological systems• A strong interest in working on innovative and complex projects• A passion for design data management and coding (beneficial)• BIM and Revit experience is an advantage.                                                                                                                                                                                                    

Minimum Requirements  Awarded a 4 or 5 year technical degree in science or engineering. Trained in leadership and project execution. Will be actively licensed with a local engineering governing body where required by law. ECSA Professional Registration Typically has 8+ years of relevant discipline experience. Has a strong background in discipline work and a competent understanding of regulations, codes, manufacturing standards, and industry standard practices. Skilled in estimating project costs and writing proposal content. Design of bulk material handling systems comprised of belt conveyors, drag conveyors, bucket elevators, dust control systems and various specialty equipment components Coordinate and direct drafters and designers in the creation of drawings Design calculations for conveyors, feeders, bins, hoppers, and other bulk materials handling equipment.

  Requirements: Strong technical ability in all aspects of Electrical Engineering Services Proactive with a strong ability to work independently and without supervision. Previous Trades experience desirable, Diploma or Degree in Electrical Engineering or equivalent Must have 3 years of experience. Experience of client, vendor & contractor interaction & management, Proactive, a good communicator with the ability to work well with others in a multifunctional project team, Excellent interpersonal and communication skills are required, Experience in Amtech, Dialux, AutoCAD and MS Office Suite Software, Good knowledge and proficiency in using Navisworks suite of tools, Excellent level of attention to detail and accuracy, Kindly send cvs to bridget@takora.co.za

Position: Senior Electrical Engineer Requirements: BSc/BEng Degree in Electrical Engineering Professional Registered with ECSA Must have building knowledge Must have consulting experience Must have min 5 years experience AUTOCAD, Revit, Relux experience Proficient with MS Office Applications Kindly send cvs to bridget@takora.co.za

Minimum Requirements:  BEng or BSc degree in Civil Engineering. Professional Engineering registration with ECSA. Minimum of 10 years’ experience as a Civil Engineer within Water infrastructure. Proficiency in use of water infrastructure software such as WaterCAD and WaterGEMS. Understanding of water management and challenges applicable to water end-users. Understanding of water quality management and treatment technologies will be beneficial.

Requirements BEng Civil Degree 3-5 years civil and structural experience Medically fit Prokon literate (Advantageous) ECSA registered  Duties: Responsible for all the structural and civil work. Perform engineering design calculations and prepare design sketches as required on assigned projects. Assists the draughtsman in the preparation of civil and structural drawings. Review, comment on and approve civil and structural drawings. Review and comment on supplier documents and other discipline drawings. Attend progress meetings and assists in the preparation of project progress reports. Assist in the preparation of contract requisitions and schedules of quantity for civil and structural work on assigned projects. Liaise with construction personnel and address site queries during construction.       send cvs to bridget@takora.co.za

Must have a B.Eng, B.Sc or B.Tech Degree in Electrical Engineering Must have experience working on commercial projects largely on hotels and high end residential. Must have Knowledge of Electronic/IP services Must have BIM experience Must have Revit, Autcad software experience MUST OWN a Passport is requirement as you will be required to travel Kindly send CV to: samu@takora.co.za  

Minimum Requirements?: • Minimum of 10 years of relevant experience in the Electrical environment, within the built environment, preferably within a consulting engineering business.• A strong background in Electrical design (mainly LV) including reticulation design, containment, and lighting designs.?• Layouts, Schematics, Schedules, and Whole System Design.• Relevant tertiary qualifications in engineering (B.Eng., B.Sc., B. Tech), inclusive of Professional Registration.• Working with colleagues in offshore locations.• Have an understanding of local & international codes & standards.• International project experience (outside Africa) (beneficial)• A willingness to learn and investigate technological systems.• A strong interest in working on innovative and complex projects.

Requirements:-Must possess a Bachelor's degree or higher in Mechanical Engineering-Must be a registered Professional Engineer or Professional Engineering Technologist with ECSA-Should possess a minimum of 10 years of experience as a Mechanical Engineer with a focus on Mechanical Building Systems Design including HVAC, plumbing, and fire protection design experience.-Must be able to use Revit, AutoCAD, and MEP. Certification is an added advantage.-Must possess an understanding of project management principles, and must be able to adhere to budget and timelines-Must have an ability to work within a team focused environment, and should be able to mentor junior staff members-Good communication, interpersonal, analytical, and problem-solving skills are essential.send cvs to bridget@takora.co.za

Minimum Requirements?: • Minimum of 10 years of relevant experience in the Electrical environment, within the built environment, preferably within a consulting engineering business• A strong background in Electrical design (mainly LV) including reticulation design, containment, and lighting designs.?• Layouts, Schematics, Schedules, and Whole System Design• Relevant tertiary qualifications in engineering (B.Eng., B.Sc., B. Tech), inclusive of Professional Registration• Working with colleagues in offshore locations• Have an understanding of local & international codes & standards.• International project experience (outside Africa) (beneficial)• A willingness to learn and investigate technological systems.• A strong interest in working on innovative and complex projects. Location: Tshwane

Minimum Requirements: • BSc/BEng, or MSc/MEng in Electrical Engineering.• Minimum of 3 to 5years’ experience as an Electrical Engineer within the Built Environment.    (International experience will be highly advantageous) • Strong technical and view of building services, focusing mainly on Electrical, and Electronics• Strong proficiency in Revit would be an advantage• working on your projects• Being confident, a team player, approachable. Location: Tshwane

I'm looking for Senior Process Engineer for Our client in UpingtonMust have BEng / BTechMust be registered with ECSA as PrEng/PrTechMust have 10 - 15 years experienceMust be Proficiency with BioWin / STOAT computer modelling softwareMust be knowledgeable with Feasibility Studies, Design and Implementation of Water and Wastewater Treatment PlantsSalary Range: R850k – R1.1m (depending on experience and skillset)Willing to relocate to Upington (Northern Cape)khomotso@takora.co.za

Water Engineer/Technologist (Specialist) BEng / BTech Afrikaans (speak) Willing to relocate to Upington (Northern Cape) Proficiency with BioWin / STOAT computer modelling software Feasibility Studies, Design and Implementation of Water and Wastewater Treatment Plants Salary Range: R850k – R1.1m (depending on experience and skillset)

Minimum Requirements: • BSc or BTech Construction Management / Building Science / Civil Engineering. • Must be registered with SACPCMP as PrCPM or PrCM.  • 10 years’ experience post qualification in Construction Management, Building Works, General Civil Works, • Competency in JBCC or NEC Contracts, • Experience on Construction of Learning Center will be an added advantage, • Experience in managing multi-disciplinary professionals, • Project scheduling, planning, and costing, • Strong leader, good communicator and ability to work on his/her own and with a supporting team, • Must have done projects from inception to completion,• Competency in Microsoft Project and managing programme deliverables,  #Must be willing to relocate to Pietermaritzburg, KZN.

Minimum Requirements: Must have experience in managing MEIPP (Mechanical, Electrical, Instrumentation, Piping, and Process) and SMPP (Structural, Mechanical, Piping and Plate work) projects.  Bachelor's degree in Mechanical Engineering. Proven experience 6+ years in construction management, specifically in the MEIPP discipline. Proven Experience in managing mining projects. Strong knowledge of mechanical including relevant codes and standards. In-depth knowledge of construction methods, materials, and best practices. Excellent project management skills, including the ability to develop and execute project plans, manage budgets, and meet deadlines. Strong leadership and team management skills, with the ability to motivate and guide a diverse team of construction professionals. Excellent communication and interpersonal skills, with the ability to effectively interact with clients, contractors, and stakeholders. Sound problem-solving and decision-making abilities, with a proactive approach to identifying and resolving issues. Knowledge of safety regulations and best practices in the construction industry. Strong attention to detail and the ability to maintain high-quality standards throughout the construction process.

Minimum Requirements: Must have Minimum B.Sc / B Eng. Degree in Civil EngineeringMinimum Six (6) years practical experience in the design of building services.Advanced Proficiency in Civil 3D and AutoCAD and Experience in Revit, Modelmaker, Bill and iDAS software will be an advantage.Design of civil infrastructure for Building services (Internal wet services & External Infrastructure) and Township services (Residential Roads, Bulk Earthworks, Sanitation, Water Reticulation & Stormwater).

Applicants must meet the following requirements:Must have a Bachelor’s Degree in Civil EngineeringMust have 5 – 8 years’ design experience in water and sanitationMust be registered with ECSAMust have excellent communication and interpersonal skillsMust be able to provide exceptional service to the clients.Must be willing to travelMust be able to work independently and within a team

Minimum Requirements: National Diploma -BTech/MTech in Civil Engineering.Minimum of 4 to 10 years’ experience as a design specialist in land infrastructure, specific to municipal services.Must be CAD proficient.Civil 3D, or Civil Designer (advantageous)

Minimum Requirements:BSc/BEng, or MSc/MEng in Electrical Engineering.  Minimum of 8 to 15 years’ experience as an Electrical Engineer within the Built Environment. (International experience will be highly advantageous). Strong technical and view of building services, focusing mainly on Electrical, and Electronics. Strong proficiency in Revit would be an advantage working on your projects.  Being confident, a team player, approachable.

Minimum Requirements: Must have Matric / any additional certificates.Must have 3- 5 years of experience.Must not be over 35 years old.Must have knowledge with AutoCad, Civil 3D.

SKILLS AND COMPETENCIES REQUIRED Proven track record in similar positions.  Proven track record of successfully leading and managing teams.  Ability to motivate, provide direction, mentor, and empower teams.  Strong written and verbal communication skills.  Organized team player with strong supervisory and leadership skills and excellent time management skills.  Able to work in a fast-paced environment.  Attention to detail and high level of accuracy.  Delegation of authority and responsibility.  Solid People Management skills. QUALIFICATIONS AND REQUIREMENTS  A minimum at least 10 years’ experience in office administration.  A minimum at least 5 years’ experience as a team leader. Any relevant qualification (office administration) will be an advantage.

Key Responsibilities: Form part of a multi-disciplinary team. Conduct the design of concrete structures, as well as steel structures, using Prokon as design platform, under the supervision of a professional engineer. Production of AutoCad and Revit structural engineering drawings and models. Production of reinforcement drawings and bending schedules.  Conduct site inspections on all types of structural engineering projects, including reinforcement inspections.  Compilation of Feasibility Reports, Design Reports, Site Meeting Minutes and Progress performance reports. Compilation of Tender Documentation and Tender evaluation reports. Attend site meetings to represent BVi structures department. Collaborate with draughts person(s) and checking detail drawings compiled.  Overall project management. Key Requirements: B.Sc. or B.Eng. in civil engineering, with focus on the structural engineering discipline. Minimum 3 years relevant verifiable practical structural engineering experience. Advanced proficiency in the following computer software programs:  AutoDesk AutoCad or similar drawing software. AutoDesk Revit (pre-requisite). Autodesk Revit - Reinforcement detailing (added advantage).   AutoDesk Revit – Creating Families (added advantage).  Prokon (pre-requisite).  Prokon SUMO modelling (added advantage). Knowledge of NHBRC rules and specifications (added advantage).  Registered at ECSA as a Candidate Professional Engineer (added advantage). Must be fluent in English and be able to speak Isizulu (added advantage). To be based or willing to relocate to Durban, KZN . Drivers license.

Key Responsibilities:Civil Engineer: Design of civil infrastructure for Building services (Internal wet services & External Infrastructure) and Township services (Residential Roads, Bulk Earthworks, Sanitation, Water Reticulation & Stormwater).Preparation of reports for all stages of project implementation, including inception, feasibility/ business plans, concept & viability, design development, tender & procurement, close-out etc.Overall contract/project management, including interaction with clients, contractors & other stakeholders, attendance of progress meetings, preparation of payment certificates, dealing with contractual claims etc.Management of multi-disciplinary teams, junior staff and supervision of drawings, designs, reports etc.Preparation of tender documentation, including specification writing, bill of quantities and drawings.Experience in compiling reports for business plans, grant-funding and multi-disciplinary projects.Experience in liaising with clients, contractors, other disciplines and various other stakeholders. Key Requirements:Minimum B.Sc / B Eng. Degree in Civil Engineering.Candidate must be Professionally registered with ECSA or submitted an application to ECSAMinimum Six (6) years practical experience in the design of building services, township infrastructure, contract management, quality monitoring, report writing etc.Experience in managing GCC & JBCC Contracts and dealing with claims.Advanced Proficiency in Civil 3D and AutoCAD .Experience in Revit, Modelmaker, Bill and iDAS software will be an advantage.Proficient in Microsoft Project, Word, Excel, PowerPoint.Must be able to communicate verbally and in writing in English. Proficiency in isiZulu advantageous.Minimum Code B (08) drivers licenseWilling to relocate to Durban, KwaZulu-Natal.

Minimum qualification, skills, and experience: BSc / BTech in Civil Engineering 3 years Professional Registered with SACPCMP 10 years’ experience in Construction Management Strong supervision and management skills Excellent in site/project administration, sub-contractors’ relation and management. Proficient in MS projects, MS Office Good client relations. Tracking of master program and reporting on the program. Excellent planning skills – procurement, subcontractors, etc Good labour relations and management Handle routine contract administration including enforcing site Health and Safety requirements. Must have a driving licence and driving experience, own vehicle will be an added advantage. Behavioural competencies: Excellent communication and report writing skills Analytical thinker and innovative. Self-starter who solves problems with little to no guidance. Strong business and financial acumen. Strong Project Management Skills Able to work under pressure. Attention to detail. Excellent interpersonal, communication and networking skills  

Minimum qualification, skills, and experience: BSc / BTech in Civil Engineering 3 years Professional Registered with SACPCMP 10 years’ experience in Construction Management Strong supervision and management skills Excellent in site/project administration, sub-contractors’ relation and management. Proficient in MS projects, MS Office Good client relations. Tracking of master program and reporting on the program. Excellent planning skills – procurement, subcontractors, etc Good labour relations and management Handle routine contract administration including enforcing site Health and Safety requirements. Must have a driving licence and driving experience, own vehicle will be an added advantage. Behavioural competencies: Excellent communication and report writing skills Analytical thinker and innovative. Self-starter who solves problems with little to no guidance. Strong business and financial acumen. Strong Project Management Skills Able to work under pressure. Attention to detail. Excellent interpersonal, communication and networking skills  

WET SERVICES ENGINEER To assist the Senior Engineers in carrying out the full spectrum of Wet Services design under supervision of the Senior Engineers and to develop into a Senior Building Services Engineer   Education: Bachelor’s Degree or B-Tech or National Diploma in Mechanical or Civil Engineering is preferable. Master’s degree is desirable. Registration as candidate engineer or Technologist with ECSA is preferable. Revit competency in MEP services is desirable. Knowledge of the working of the software. Experience: Minimum 2-3-5years of experience of wet services, including but not limited to the following: Water pipe reticulation design for buildings and sites with reference to domestic and fire water supply. Hot water pipe reticulation design for buildings. Soil and Waste Drainage design for all types of buildings.   Khomotso@takora.co.za

Minimum RequirementsUniversity/University of Technology Degree as a Quantity Surveyor.Registration as a Professional Quantity Surveyor with SACQSP.ExperienceAt least three (3) years’ experience as a Quantity Surveyor and familiar with WinQS and DimensionX Software.Duties and Responsibilities:Preparing estimates of construction costs.Advise on Procurement Policy for the projectAdvise on Economic factors affecting the projectConduct condition assessments, prepare presentations with project cost estimates.Provide necessary information within the agreed scope of the project to the other consultantsAdvise on other consultants and services required.Liaise, co-operate and provide necessary information to the client, principal consultant and the other consultantsAdvise and assist in preparing necessary value engineering and life cycle cost reports as requiredMeasurement of building quantities for bill preparation and final accounts.Drafting Bills of Quantities.Site visits for valuation of work progress.Preparing valuations for issue of interim payment certificates.Performing cost management of construction projects.Preparing and concluding final accounts.Assisting with claims and dispute resolutions.Project ManagementSalary: Market relatedEmail address: khomotso@takora.co.za

One of our Clients is looking for a Professional Engineer individual to be based in Mbombela Office.   Minimum Qualifications BSC/ BTech (Civil Engineer/Technologist). Registration as a Professional Engineer/Technologist with ECSA.   Experience At least five (5) years’ experience in roads and stormwater design.   Duties and Responsibilities Conduct feasibility studies and prepare reports. Conduct condition assessment and prepare reports and presentations. Liaise, co-operate and provide necessary information to the client, principal consultant and the other consultants. Advise on Economic factors affecting the project. Design Development of roads and stormwater infrastructure. Provide necessary information within the agreed scope of the project to the other consultants and advise on services required. Conduct site visits for evaluation and approval of work done by the contractors. Assist the Quantity Surveyors in preparation and issuing of interim payment certificates. Performing cost management of construction projects. Assisting with claims and dispute resolutions. Project Management. Salary : Market related Email address: khomotso@takora.co.za  

Minimum Requirements  BSc or BEng or B. Tech in civil Engineering Must be registered with ECSA as a Candidate  Minimum of 2 -5years’ experience in land infrastructure, specific to municipal services / built environment, in both public and private sectors Must be Civil 3D proficient.

Must have BEng Qualifications. Must Be Professionally Registered with ECSA. Must have Knowlege with Revit ,Civil 3D and Water Gems(Bentley) Must have 8-10 years of Experience Must have extensive experience with water.

1.Must have BSc/BEng Qualification. 2 .Must be professionally registered with ECSA as a Pr. Technologist/Pr Eng 3.Must have minimum of 5-7 years of experience. 4.Must have Experience with Stormwater and Roads.

RESPONSIBILITIES Assist civil, structural, electrical and mechanical designers with the preparation of drawings such as layout plans, sections, elevations, details, reinforcing scheduling, etc.; Prepare drawings for preliminary design, detail design, tender, construction and close out (record drawings) stages of a project; Create drawing registers, capture drawings to drawing register and create drawing issue slips; Issue drawings to relevant authorities and professionals; Prepare building plans and basic Revit building models. Requirements QUALIFICATIONS AND EXPERIENCE National Senior Certificate (NSC) (Grade 12); At least 5 years’ verifiable experience in draughting in the built environment post Grade 12; Theminimum qualification requirement is a Certificate of Completion in AutoDesk Revit Structures and an N4/N5 Multi-Disciplinary Drawing Office Practice (MDDOP) National Certificate OR a Certificate of Competency from a Member College of The South African Institute of Draughting; Efficient in the use of AutoCAD, Revit Structures, Revit MEP and Microsoft Office Suite (essential); Experience in the use of AutoCAD Civil 3D, Building Information Modelling (BIM) software, in particular BIM360, ACC Docs, ACC Build and ACC Collaboration Pro will be advantageous; Must be an effective communicator (personal, phone, writing, email, etc.). ADDITIONAL REQUIREMENTS Own Vehicle Valid Driver’s Licence  

Minimum Requirements   Certificate or Diploma in technical drawing. Experience and understanding of Microsoft Office packages. Minimum 2-5 years proven working experience in the engineering field, specifically 2D/3D draughting of Understanding of various drawing file types and format exchanges. Ability to streamline existing workflows or improve process efficiencies. Experience in Revit 3D modelling, Generate 3D models of infrastructure design within the Engineering Design context, for marketing, project or design related purposes. Develop and generate plans, sections, elevations, and details from 3D models within the BIM context. Extract engineering data and metadata from 3D models within the BIM context when required. Role Responsibilities   Preparation, finalizing, issuing (using appropriate platforms) and managing the filing of Mechanical design and related drawings. Understanding/incorporating/implementing applicable drawing standards related to different clients and disciplines. Developing and managing drawing standard pro formal’s and ensuring the implementation there-of. Compilation of various types of drawings by various disciplines and ensuring a high level of quality control is maintained.  

Minimum Requirements • BSc/MSc or B Eng/M Eng within building services related field, with HVAC and Wet Services experience • Minimum of 6 years of relevant experience in the Mechanical environment, within the built environment, preferably within a consulting engineering business • Professionally Registered (Pr Eng or similar) • A strong background in HVAC design, including chilled water systems design, refrigerant system design, reticulation design, , air side system design, compilation of specifications, heat load simulation using Carrier or IESVE • Demonstrable experience leading large projects, from concept, through to construction • Have strong understanding of local & international codes & standards, including those applicable to South Africa, Middle East, SE Asia & Australia • Previous exposure to data center, stadiums, education, healthcare, and other commercial related projects • Understanding of LEED/WELL requirements (beneficial) • Up-time Institute Accredited Tier Designer (ATD) (beneficial) • International project experience (outside Africa) (beneficial) • Strong proficiency in Revit with the ability to deliver to a minimum of LOD300 (beneficial) • A willingness to learn and investigate technological systems • A strong interest in working on innovative and complex projects

Minimum Requirements • Diploma or BTech BSc/MSc/ BEng/ in Electrical Engineering • Minimum of 3 to 5 years of relevant experience in the ELV /Built Environment , within the built environment, preferably within a consulting engineering business Role Responsibilities • Provide support to a team of digital designers, engineers, technicians, and modellers • Coordinating the design and virtual construction of the relevant building services designs forming part of projects such as data centres, education and sports facilities, hospitals, commercial buildings, and transport facilities • Managing and quality checking deliverables (incl. modelling works, data/parameter management) carried out by global and multinational dispersed & remote teams • Co-ordinating with other disciplines • Facilitating virtual and mixed reality

KNOWLEDGE, SKILLS, AND ATTRIBUTES1. BSc or BEng or BTech in Civil Engineering2. Registration as a Professional Engineer/Technologist (Pr.Eng / PrTechEng) with ECSA3. Minimum 5 years’ relevant experience in construction, projects site supervision and project engineering.4. Thorough working knowledge of specifications and Bill of Quantities (COLTO / COTO, SANS 1200, project specific etc.) & Conditions of Contract (SAICE GCC, FIDIC, NEC).5. Proficient Microsoft Office skills required. KEY RESPONSIBILITIES 1.Quality Assurance Oversight and Coordination.2. Legal Compliance.3. Health, safety, and environmental Compliance.4. Supply chain management compliance for procurement and supervision of contracted service providers, sub consultants, and specialists.  

Job Requirement: • Ability to work with AutoCAD (desired) CAD packages • Experience and understanding of Microsoft Office packages. • Minimum 3 - 5 years proven working experience in the engineering field, specifically 2D/3D draughting • Understanding of various drawing file types and format exchanges. • Ability to streamline existing workflows or improve process efficiencies. • Experience in 3D modelling. Generate 3D models of infrastructure design within the Engineering Design context, for marketing, project or design related purposes. • Develop and generate plans, sections, elevations, and details from 3D models within the BIM context. • Extract engineering data and metadata from 3D models within the BIM context when required.

Project Manager Position. Project Location -Mozambique Duration-18 Months Requirements :Must be registered with the SACPCMP with a minimum of 10 years experience in mineral processing and mining environment.The ideal candidate must have worked as a registered PM for at least 8 years.Minimum Qualifications Degree in either Metallurgy/Chemical Engineering/Mining Engineering/Mechanical Engineering.Nationality: OpenNotice period: Immediately available individuals

Certificate or Diploma in technical drawing. • Ability to work in both MicroStation (obligatory) and AutoCAD (desired) CAD packages • Experience and understanding of Microsoft Office packages. • Minimum 2-5 years proven working experience in the engineering field, specifically 2D/3D draughting of large roads projects. • Understanding of various drawing file types and format exchanges. • Ability to streamline existing workflows or improve process efficiencies. • Experience in 3D modelling. Generate 3D models of infrastructure design within the Engineering Design context, for marketing, project or design related purposes. • Develop and generate plans, sections, elevations, and details from 3D models within the BIM context. • Extract engineering data and metadata from 3D models within the BIM context when required.

Job DescriptionLukhozi Consulting Engineers is recruiting a Registered Electrical Technologist or Technician for their office in Port Elizabeth or East London.• Conducting scoping and condition assessments and reporting.• Management of the planning, design, and construction projects from inception to completion for building services projects.• Preparation of tender documents.• Preparation of reports (Project Inception, Concept and Viability, Design, tender evaluation, progress, financial, close-out, etc).• Day-to day administration of projects.• Taking responsibility for the design of electrical building services and urban and rural reticulation and distribution.• Administrate electrical engineering contracts as the Engineer in terms of the contract.• Provide construction oversight for quality control and expediting of design clarifications.• Provide construction oversight for design adherence and quality control and expediting of design clarifications.• Handling of technical queries and resolutions and leading Site and Technical Meetings on site, including the taking of minutes.• Review of contractors Quality Control Plans and Construction Method Statements.• Preparing Payment Valuation and measuring of electrical and electronic installations.• Communicate frequently with all professionals and clients.• Handling of technical queries and dispute resolutions in conjunction with others.• Assist with project safety and environmental matters during construction.• General office and project related admin if required.Requirements At least a B.Tech Eng. degree in electrical engineering. Registration with the Engineering Council of South Africa as a Professional Engineering Technologist (PrTech Eng) or Pr Techni Eng. At least three (3) years' post graduate experience Experience in the design and managing of building services projects. Experience in municipal building service projects for electrical, electronic, solar photovoltaic systems and fire detection. Experience in urban and rural reticulation and distribution. Experience in Health, Education and Public Works projects. Experience in the use of Building Information Modeling (BIM) software, in particular BIM360, ACC Docs, ACC Build and ACC Collaborate Pro will be advantageous. Efficient in Relux lighting design is required and Dialux will be advantageous. Efficient in Autocad is required and Revit MEP will be advantageous.Own transport and valid driver's license.

Requirements Must Have a  Degree Must Be Registered With ECSA as a Pr Eng. Must have  8+ years of relevant post registration experience. Must have worked with SANRAL/RAL Projects. Must have Knowlegde with Revit and AutoCad.      

Job Description Lukhozi Consulting Engineers is recruiting an Electrical Engineer in Cape Town, Port Elizabeth or East London. Conducting scoping and condition assessments and reporting. Management of the planning, design, and construction projects from inception to completion for building services projects. Preparation of tender documents. Preparation of reports (Project Inception, Concept and Viability, Design, tender evaluation, progress, financial, close-out, etc). Day-to-day administration of projects. Taking responsibility for the design of electrical building services and urban andrural reticulation and distribution. Administrate electrical engineering contracts as the Engineer in terms of thecontract. Provide construction oversight for quality control and expediting of design clarifications. Provide construction oversight for design adherence and quality control andexpediting of design clarifications. Handling of technical queries and resolutions and leading Site and Technical Meetings on site, including the taking of minutes. Review of contractors Quality Control Plans and Construction MethodStatements. Preparing Payment Valuation and measuring of electrical and electronic installations. Communicate frequently with all professionals and clients. Handling of technical queries and dispute resolutions in conjunction with others. Assist with project safety and environmental matters during construction. General office and project related admin if required. Requirements At least a B.Eng or B.Sc(Eng) degree in electrical engineering. Registration with the Engineering Council of South Africa as a Professional Engineer (PrEng). PrTech Eng will not qualify. At least four (4) year’s post professional registration with the Engineering Council of South Africa Experience in the design and managing of building services projects. Experience in municipal building service projects for electrical, electronic, solar photovoltaic systems and fire detection. Experience in urban and rural reticulation and distribution. Experience in Health, Education and Public Works projects. Efficient in the use of Microsoft Office Suite. Experience in the use of Building Information Modeling (BIM) software, in particular BIM360, ACC Docs, ACC Build and ACC Collaborate Pro will be advantageous. Efficient in Relux lighting design in required and Dialux will be advantageous. Efficient in Autocad is required and Revit MEP will be advantageous. Must be an effective communicator (personal, phone, writing, email; etc);

Job Description Lukhozi Consulting Engineers is recruiting a Professional Civil Engineer or Technologist for their office in Cape Town.· Planning, design and contract administration of civil engineering projects from inception to completion.· Preparation of tender documents.· Preparation of reports (Project Inception, Concept and Viability, Design, tender evaluation, progress, financial, close-out, etc).· Day-to-day contract administration and management of civil engineering projects.· Handling of technical queries and resolutions and leading Site and Technical Meetings on site, including the taking of minutes.· Financial control of construction contracts· Communicate frequently with all professionals and clients.· Handling of technical queries and dispute resolutions in conjunction with others.· Assist with project safety and environmental matters during construction.· General office and project related admin.Requirements • At least a bachelor’s degree in civil engineering.• Registration with ECSA as a Professional Engineer or Professional Engineering Technologist.• At least 4 years’ verifiable post graduate experience in the planning, design and contract administration of civil engineering and building projects from inception to completion.• Proficient in the use of Microsoft Office Suite and Microsoft Office Project.• Basic knowledge and experience with AutoCAD Civil3D.• Experience in the use of Building Information Modeling (BIM) software, in particular ACC will be advantageous.• Own Vehicle• Valid Driver’s License

RESPONSIBILITIES Compilation of reports (basic assessments, scoping reports, environmental impact assessments, audit reports, etc). Assistance with day-to-day administration of projects, including public participation associated with projects. Planning and completing environmental audits. Undertaking on-site environmental monitoring, training and guidance to contractors. Review of contractors’ Quality Control Plans and Construction Method Statements. Compiling proposals and project reports. General office and project related admin if required. Requirements A degree (BSc or BTech) in Environmental Science or Environmental Management. Suitability for Registration with EAPASA as a Candidate Environmental Assessment Practitioner (EAP). Registration with EAPASA as a Candidate EAP will be advantageous. Efficient in the use of Microsoft Office Suite. Efficient in the use of Microsoft Office Project (advantageous). At least 2-5 years’ post qualification experience in the environmental impact assessment and monitoring field. Must be an effective communicator (personal, phone, writing, email; etc). Own Vehicle Valid Driver’s License Willingness to travel (where required)  

Duties: Measuring electrical drawings issued for construction in order to provide an accurate final account with information at hand. Prepare and submit the following: Monthly interim payment applications for certification and payment, which includes sitting down with contract's manager to go through all costs / expenditure and works at hand, Quotations of site instructions and / or variation orders received. Quotations of options available to improve final product. Request suppliers' quotations, adjudicate & place official purchase orders. Sub-contractors claim verification, certification for payment as and when required. Site visits in order to assess: site conditions and any incurring changes caused; additional requested work done needing written approval; monitoring of materials, labour & sub-contractors on site. Qualifications and Skills Quantity Surveying An Electrical Qualification / certification (Advantageous) Commercial qualifications (Advantageous) Understanding of basic Finance or Accounting. Drivers’ license. Ability to work in a team and independently. Good communication skills. Prepared to work irregular hours when required. Ability to work under pressure. Physically fit and in good health to pass site fitness tests. Must possess negotiation skills. Must be an innovative, creative thinker, flexible and excellent organizer. Can work with less supervision and under extreme pressure

Duties: Putting Management Structures in place for the daily running of the site by the Site Manager Direct communications with the Client Project Management Team to control construction and installation activities. Assisting the Site Manager in Resource Planning and allocation of manpower Lead in Commercial and Contractual Planning of the Project. Monthly Progress Invoice with QS Team Overseeing all Site Instructions / Variations Managing of the Final Measure All Claims Assessment and Calculation Liaising with procurement officer on material requirements Final Handover with the Client Project Management Team, including the following: Quality Control Contractual Handover Safety Handover Construction Handover Commercial Agreement and Final Payment Disestablishment and Close Out Project Close Out Reports Qualifications and Skills An Electrical Qualification NQF Level 5 and above A Construction Project Management Qualification (Advantageous) Commercial qualifications (Advantageous) SHEQ knowledge. Understanding of basic Finance or Accounting. Drivers’ license. Ability to work in a team and independently. Good communication skills. Prepared to work irregular hours when required. Great knowledge on project management. Diagnostic, fault-finding and solution finding skills. Ability to work under pressure. Physically fit and in good health to pass site fitness tests. Strong leadership skills. Must possess negotiation skills. Must be an innovative, creative thinker, flexible and excellent organizer. Can work with less supervision and under extreme pressure  

 Qualification Must have a BSc/B.Tech Quantity surveyor Degree 3-6 years experience multidisciplinary (Civil’s or building etc) experience Must be registered with SACQSP as a Professional Quantity Surveyor (Pr.QS) Duties Facilitate and oversee all Quantity Surveying tasks related to stages 1 to 6 of the project lifecycle, as per standard industry norm and acts. Populate lifecycle cost models. Assist with procurement/appointment processes, ensuring that all stages including per-qualifications, enquiries, Bills of Quantities, adjudications, awards and contract preparation are performed effectively Ensure that project cost variances and change control processes are effectively and pro-actively managed Ensure that cost management and valuation work is managed effectively Preparation of monthly valuations and cost reports, and presenting same to the client Value engineering, risk management and life cycle costing where applicable. Formalizing, implementing and administering contractual agreements with suppliers/contractors. Ensure compliance to contractual terms and conditions. Assessment of contractual claims and disputes. Ensuring that final accounts are negotiated and agreed timeously.

Role Responsibilities • Responsible for all design and modeling aspects within the municipal services realm – from planning, conceptual design to detailed design and construction drawings specific to land development and municipal infrastructure. (Roads, stormwater, water, sewer, telecoms, bulk earthworks) • Prepare reports required by the project, implementation of all relevant codes of practice and ensuring that all work complies with quality control procedures and is implemented to SANS 1200 or relevant requirements Minimum Requirements • BSc or BEng or B. Tech in civil Engineering • Minimum of 5-10 years’ experience in land infrastructure, specific to municipal services / built environment, in both public and private sectors • Must be Civil 3D proficient.

Applicants must meet the following requirements:1.Must have a Bachelor’s degree in civil engineering.2.Must be registered with ECSA as a Professional Engineer or Professional Technologist.3.Must have at least 5 -12 years’ With Water Projects4.Must be Proficient in the use of Microsoft Office Suite and Microsoft Office Project.5.Must have knowledge and experience with AutoCAD Civil3D/IDAS6.Must be an effective communicator (personal, phone, writing, email; etc)If you do not hear from us within two weeks, consider your application unsuccessful.

Our Client is Urgently looking for a Procurement Officer to start Immediately for their Polokwane Office. Must have Diploma/ Btech Must have 2 - 5 years experience Must have experience in Tender administration( Quotation, Purchase Orders, Invoices,)\ Must have Financial background. The position is a 2 years Contract with Possibilities of renewal.    

Our Client is looking for Electrical Design Engineer to be based at their JHB Office. The candidate must be registered with ECSA . Must have N. Dipl or B Tech Elec Eng. Must have Previous consulting or construction experience. Building services experience. Must have Minimum 3 to 4 years experience. Must have experience in tenders or willing to do tenders. 12 months contract. Renewable subject to project pipeline. Must be willing to work under pressure. Proficiency in MS packages and MS Projects. R30K

Key Requirement Pr Eng/Pr Tech Minimum of 7-10 years of experience Bachelor of Technology in Electrical Design Tools AUTOCAD REVIT key Responsibilities Designs for Electrical Infrastructure Projects by applying relevant codes of practice. Facilitate and implement electrical Infrastructure Projects Experience on Electrification, Building Services, EEDSM and Solar system (renewable energy) Provide technical Solutions and Support Provide Supervision and Mentoring Junior Staff Manage the project team and its activities within the relevant legal framework. Prepare technical documents as part of the legislative approval process for project submission approval.        

Role Responsibilities: High level technical understanding of the design of bridge and renewable energy projects • Working knowledge of AutoDesk Revit. Drafting bridge and renewable energy drawings including reinforcement Setup and maintenance of project drafting folders in BIM 360 Minimum Requirements: Minimum of 3 years’ relevant experience.  Ability to work in a dynamic environment and adapt to frequent project changes.  Ability to follow instructions and drafting standards. Accuracy and effectiveness in latest technology. Ability to work effectively as part of a team or independently with minimal oversight.  Able to learn and to develop new skills and workflows for new digital tools. • Team player, self-motivated and proactive

Relevant BSc/BEng/BTech degree.• At least 2 to 3 years Road (Geometric) design experience gained in a consulting environment• Experience designing with Open Roads or Power Civil as well as competency in MicroStation• Sound project design and deliverable management experience• Sound communication skills

This job will suit a Geotechnical Engineer / Engineering Geologist with 10+ years’ experience, who shall assist with the analysis of information, production of designs, computations, and reporting. • Regular interaction with external clients in the planning of projects and/or the completing of projects is required. • Previous work experience in Australia, New Zealand and/or Middle East regions would be an advantage. • Be a mentor to the existing team members including geotechnical engineers and engineering geologists.

Main Resposibility. Assisting in Design of water supply infrastructure (reticulation, bulk pipelines, reservoirs, pump stations)   Minimum National Diploma in Civil Engineering.Minimum Four (4) years relevant experience in water projectsAbility to work inAutocad (pre requisite)Ability to work in Civil 3DExperience in Modelmaker, Bill, Revit andiDAS software will be an added advantage.Proficient in Microsoft Word, Excel, PowerPoint.Must be able to communicate verbally and in writing in English. Proficiency in isiZulu advantageous.Minimum Code B (08) driver’s licenseWilling to relocate to Durban, KwaZulu-Natal.  

Location -Durban or willing to relocate to Durban 1. Minimum National Diploma in Civil Engineering.2. Minimum Four (4) years relevant experience3.  Autocad (pre requisite)4.  Ability to work in Civil 3D5. Experience in Modelmaker, Bill and6. iDAS software will be an added advantage.7. Proficient in Microsoft Word, Excel, PowerPoint.8. Must be able to communicate verbally and in writing in English. Proficiency in isiZulu advantageous.9. Minimum Code B (08) driver’s license10. Willing to relocate to Durban, KwaZulu-Natal.

National Diploma or B Tech in civil engineering ECSA -Candidate/ Pr TechnologistMinimum 8 years relevant verifiable practical structural engineering experienceProficiency in the following computer software programs:1. Microsoft Word2. Microsoft Excel3.Microsoft ProjectsMust be fluent in English and be able to speak IsiZulu (added advantage)To be based or willing to relocate to Richards Bay, Kwazulu-NatalDrivers license

Location -Cape Town or Willing to Relocate to Cape Town Bsc/BEng or Msc/Meng or BTech/MTech in Engineering Minimum 5-10 years experience as Fire Engineer Must have worked with BS,NFPA and SANS Standards  

QUALIFICATION: BTech/Bsc/B Eng Civil Engineering (Water) PROFESSIONAL REGISTRATION: Pr. Eng./Pr. Tech Eng.   BUSINESS UNIT: Water and Sanitation   EXPERIENCE: Minimum 10 Years Post-Qualification in Water and Sanitation projects municipal projects, Water Treatment Work and Waste-Water Treatment Works Design will be an advantage. ADDITIONAL ADVANTAGE: Driver’s license and own Vehicle Key Competencies: Proficiency in Microsoft Word, Excel, Outlook, Powerpoint and Projects Proficiency in Model Maker, Pipe Maker, AutoCad, Civil Designer, AutoCad Civil 3D, WADISO (Design orientated software) Technical Expertise in Design Knowledge and Application of Construction Contracts Understanding of the project management life cycle Clear communication Skills, proficiency in the English language Proven record of Client Liaison Project Management Leadership and Team Co-Ordination Management Skills   Office Duties: Mentorship and leading a team of 10 or more Technologists and Technicians to Professional Registration. Project and Financial Reporting Resourcing, Planning, Organization, and co-ordination of unit activities Monthly Business Unit reporting to Operations Head Develop business plans, feasibility studies, conceptual designs including all documentation Development stage and preparation of all documentation and drawings Attend project co-ordination meetings and liaise with Professional Team, Model designs on relevant Design Software; Ensure required consents and approvals are obtained from the Stakeholders and lead times are managed efficiently; Prepare high level cost estimates for design options and detailed estimates for construction; Outline specifications and incorporate into design and contract documentation; Prepare tender documentation, conduct/oversee clarification meetings, adjudicate submissions and compile adjudication reports; Conduct site monitoring and quality control and follow company quality site assurance documentation. Manage the detail drawing development with technologists and technicians Preparation of close-out reports Assistance of bidding team in compiling bids and proposal documents   Site Duties: Site Assessments and site investigations Quality Assurance and approvals Technical support through technical meetings Compile and manage site records and calculate payment certificates; Chairing of site meetings (including tender briefing, progress meetings;

LEGAL REQUIREMENTS Minimum Code 08 Driver’s LicenseBachelor of Science in Engineering - Civil Engineering (BSc Eng Civil) Registered as a Professional Engineer with ECSA.   PRIMARY PURPOSE OF THE JOB: To monitor and oversee the status of construction projects, through the involvement of creating budgets, reviewing safety issues, and managing construction progress and teams of technical & supervisory staff. Job Description Manage Project Contracts,• Manage Contract programme and allocated budget,• Assist site staff with technical knowledge,• Tender evaluation and recommendation – if Service provider requirement,

Location- Eastern Cape and Free State B Tech in Built environment, Commerce or Human Sciences Related Minimum Experience:4 years related experience of Contracts Management in Built environments Contract Manager for the 3 Year TSSC for Repair and Maintenance of Substation Facilities in the Southern GridTo manage a complete and effective discipline contracts management service across the lifecycle of a project through collation, costing, evaluation, dispute resolution, administration, and controls of contracts on portfolio of projects. Plan, control, and report on the usage of task orders for professional services and other engineering/construction contracts. Determine the need for external capacity in functional areas by updating of TPD resource planning model on a quarterly basis. Assess and evaluate performance of Eskom’s Consultant and Eskom’s Subcontractors against the contract and maintain records for auditing purposes. Deliver contract management control and administration services, including managing contract compliance assurance information to minimise contractual risk to Eskom, review and report on areas of non-compliance. Manage and report the provision of a contracts management service and ensure the validation and maintenance of accurate information in the designated system. Initiate contracts management analysis and provide reports, manage and report on contractual analysis, identify variances, claims and compensation events, and highlight potential problem areas. Advise on cost containment approaches on projects and monitor compliance. Manage and resolve contract disputes, adjudications, arbitrations and legal proceedings. Manage contract documentation, selection, population, collation and compilation for approval. Manage and conclude tender evaluation processes, contract clarifications and cost negotiations. Manage team performance development of skills, knowledge and capabilities. Manage compliance with all Eskom and site related governance and safety, health, environment, risk and quality requirements.

Our Client is looking for HVAC Design Engineer for the Substation Resource Pool – Various Projects. Responsibilities Civil engineering designs and compile design reports as stipulated by the task schedule or engineering work request submitted by the departmental clients. This will include the following but not limited to the list below; •Compilation of scope of work, •Compilation of Bill of Quantity, •Compilation of evaluation strategy(s), •Compilation of tender strategy, •Compilation of Design drawings and reports, and •Evaluation Reports. ADDITIONAL REQUIREMENTS (Over and above what is provided for in the contract) The resource will also be required to do site visits on requests depending on the stage/phase of the project or as instructed by the departmental manager.   Qualifications Line design engineers (Electrical) Qualifications (minimum): (B. Sc Eng/B. Eng/B. Tech in Electrical Engineering Professional Registration: Professional registration with ECSA as a professional engineer or professional engineering technologist Experience and Skills Set: Extensive experience in the design of major DC transmission lines – 15 - 20 years’ experience Knowledge of substation design standards and practices. Technical report writing skills Presentation skills Ability to work in a team

Good understanding of the design principles related to the following systems: MV and LV Overhead Lines; MV Switchgear; LV Switchgear; Motor Control Centres; Lighting and small power;   Pr. Eng / Pr. Tech Eng Minimum 10 years of relevant Electrical Building Services and Rural Electrification design experience. Reporting to Management, the incumbent will be responsible for all electrical design activities. Strong knowledge of electrical design requirements & practices through the various project execution phases. Experience on green and brown fields projects and/or projects requiring integration with existing systems. Sound communication, negotiation, interpersonal and coordination skills. Must be able to function well in a small team environment. Must be able to deliver the electrical design in totality. Will be required to travel to project sites, on an as needed basis, to support the design and/or construction activities. Tender experience with creating tender documents, presentation at bid specification committees and providing tender evaluation reports. Design Tools AutoCad. Relux/Dilux Revit (Advantageous

Location -Johannesburg (Vanderbijlpark) Design Engineer Required Civil engineering designs and compile design reports as stipulated by the task schedule or engineering work request submitted by the departmental clients. This will include the following but not limited to the list below;  should have extensive Geometric design experience using Autodesk or Bentley design tools.•Compilation of scope of work,•Compilation of Bill of Quantity,•Compilation of evaluation strategy(s),•Compilation of tender strategy,•Compilation of Design drawings and reports, and•Evaluation Reports. Qualifications (minimum): (B. Sc Eng/B. Eng/B. Tech in Mechanical /Electrical or Civil EngineeringProfessional Registration: Professional registration with ECSA as a professional engineer or professional engineering technologist.

Location -Johannesburg Position-Mechanical Engineer Applicants Must meet the following requirements Must have BSc/MSc or BEng/MEng within building services related field, Wet Services and Fire Protection experienceMust 6 years of relevant experience in the Mechanical environment, within the built environment, preferably within a consulting engineering business.Must Professionally Registered (PrEng).A strong background in Wet Services/Fire Protection design, including Domestic Water, Waste Drainage, Rainwater drainage, LPG, Sprinkler Protection & Dry Fire Protection Systems (e.g. FM200).Demonstratable experience leading large projects, from concept, through to construction. 

Responsibilities • Financial reporting - Responsible for accurate and timeous management information on a monthly and quarterly basis to management and executive committees. • Compliance and Risk Management – ensuring best practice compliance monitoring and reporting, cooperating with Sanlam Corporate central compliance and risk functions. • Operational governance (FICA, PDDs, FAIS etc). • Stakeholder management and engagement with various internal and external stakeholders (This includes Vendor management; Outsource agreements; Corporate Finance, Risk, Compliance teams; Internal audit engagement and relationship; Facilities). • Operational Process - Ensure optimal operational processes and controls to ensure delivery in line with SLA’s. • Operations management – provide the operations area with direction in terms of the business strategic goals, new business implementation, contracts, investment operations. • Budget preparation and monitoring. • People management - set clear direction to team members in respect of team goals, objectives and outputs, performance management, training, mentoring and resource management. • Systems – monitoring systems for suitability to business needs and providing input into the prioritization of enhancements and requirements. • Expense management – driving efficiencies across the different areas including active management of controllable vs uncontrollable expenses, acquisition expenses vs maintenance expenses vs project costs, support costs.   Qualifications • Relevant degree (postgraduate qualification advantageous). • 5 – 7 year’s management experience in retirement fund administration. • Strong commercial acumen. • Risk and Compliance experience is beneficial.

Structural Engineer - Building (Concrete)A renowned engineering consulting company seeks to employ a Senior Structural Engineer with building experience to based in Randburg, suitable applicants should be registered with ECSA as Professional Engineer and must have worked on commercial, industrial and high-rise building projects such Hotel, Hospitals, apartments, schools etc.Applications must meet the following requirements:Must have Bachelor’s degree in civil engineering.Must be registered with ECSA as a Professional Engineer.Must have at least 10 - 15 years verifiable post graduate experience.Must have knowledge and experience with : AutoDesk AutoCAD & Revit, Autodesk Revit -Reinforcement detailing and Creating Families, Prokon, Prokon SUMO modelling.Must be Proficient in the use of Microsoft Office Suite and Microsoft Office Project.Must have Knowledge of NHBRC rules and specifications.Must be fluent in English.Must have Code B (08) driver’s license.Must be based or willing to relocate to Pretoria.

Our Client is currently seeking a high experienced senior Structural Engineer Specific Job requirementsThe successful candidate will be responsible for the following duties: Defining and understanding specific project scope and deliverables, and manage the submission of competitive proposals Functioning as part of a project team, liaise with other professional team members, other engineering disciplines and contract ors Coordination and management of structural engineering design team Planning and management of the engineering aspects of projects in terms of scope, time, costs and quality Prepare Contract administration documentation based on NEC3/ NEC4 Requirements  Minimum 8 years’ experience in engineering and design of concrete and steel structures  Experience in the Oil & Gas Environment will be an advantage Solid knowledge and understanding of software like Bentley Microstation and/or AutoCAD, Prokon and Revit   Qualifications BSc/BEng Degree in Civil Engineering  Registration with ECSA as Professional Engineer

Our client is looking for Resident Engineer with Water Infrastructure experience to be based at their Kwa-Zulu Natal Office.   Position: Resident Engineer (Water Infrastructure) Location: Kwa-Zulu Natal or willing to relocate Applicants must meet the following requirements:   Must have Diploma, Bachelor of Technology , Bachelor of Science in Engineering. Must be registered with ECSA as a professional Engineer or Professional Technologist. Must have 6 – 12 years of experience in Municipal Water Infrastructure projects (Water, Wastewater projects). Must have knowledge with Refurbishment of bulk meter & valve chambers including construction of chambers and concrete works.   Please send your application to Info@takora.co.za only suitably qualified applicants will be contacted.

Position: Structural Engineer - Building (Concrete)Location: Durban or willing to relocate to Durban Email: info@takora.co.zaApplications must meet the following requirements:Must have Bachelor’s degree in civil engineering.Must be registered with ECSA as a Professional Engineer.Must have at least 5 - 12 years verifiable post graduate experience. Must have knowledge and experience with : AutoDesk AutoCAD & Revit, Autodesk Revit, Prokon.Must have Knowledge of NHBRC rules and specifications.Must be fluent in English and be able to speak Isizulu.Must have Code B (08) driver’s license.Must be based or willing to relocate to Durban.If you do not hear from us within two weeks, consider your application unsuccessful.

Position: Business Intelligence (BI) DeveloperSalary Range: R900k-R500kLocation: Pretoria/Willing to relocate to PretoriaEmail: Info@takora.co.zaApplicants Must meet the following requirements: • Must have Related Bachelor’s degree or Diploma. • Must have 5 years’ experience in production with MSSQL suite.• Must have knowledge with SQL – Strong skills required here .• Must have knowledge with SSIS (Integration Services). • Must have knowledge with SSRS (Reporting Services) .• Must have knowledge with SSAS (Analysis Services, DAX) .• Must have knowledge with GIT. • Must have knowledge with QlikView .